The LED illumination's life span refers to the average time it takes for the brightness to drop from the maximum light quantity (quantity at shipment) down to 50%. Approximately 15000 - 30000 hours for red and 5000 - 15000 hours for white, blue, and green (estimated value for reference).

The LED element unit's response time is approximately 50 - 100 nsec. The lighting response time when using the MG-Wave® MLEK LED Controller (power supply) is approximately 0.3 msec. We conduct progressive measurement tests. Please contact us for details.

We carry various LED illumination products which include the following types of lighting: spot, ring, backlight, coaxial illumination, bar/line, and dome types. However, halogen light sources and LED have differences; starting with spectrum characteristic differences. Lighting effects can also vary depending on the workpiece. Therefore, it is difficult to give a generalized recommendation for a product that will support your request. In order to select optimal lighting, we must review each case separately.

Basic parts have operation compatibility. Specifications may vary depending on the function and model. Please refer to each model's product documentation (instruction manual, specifications, etc.)

All MG-Wave® power supply models can support use with 200 VAC. You may purchase the optional controller cable for 200 V input or use with specifications under 200 VAC.

All of our MG-Wave® LED illumination cables come with a standard length of 500 mm. You may also connect an optional extension cable (available in 1 m, 2 m and 3 m). You may also special order custom length extension cables. However, connection of multiple extension cables and special order (custom length) cables can affect light intensity control due to increased conductor resistance. Please contact us beforehand.

There is a possibility that lighting can be affected by noise, etc., depending on the external environment and conditions of use. For use in environments other than normal indoor use, please contact us.

Our standard lighting equipment products are designed and produced for use in normal indoor environments. They cannot be used outdoors. Special support is available for lighting equipment for use outdoors or in special environments.

They cannot be connected, as connections for standard MG-Wave® and MCV-Light products are not compatible. MG-Wave® can only be connected to a dedicated power supply. MCV-Light lighting cannot be connected to the MG-Wave®'s power supply. If you have specific requirements, please contact us. We will review whether we can support your requirements by special order.

We accept LED illumination special orders starting with orders for one unit. Please contact us with your required specifications, price, etc.

Most MG-Wave® LED controller devices can be secured in an upright position using the "Light Source Mounting Fitting" (MHF-PT001) under the halogen light source options. There are some non-applicable models. Please contact us beforehand about securing devices.

We have abundant experience with various applications. Please contact us with the application, required specifications, etc.

It is assembled so that the top surface of the lighting and top surface of the diffuser plates are flush. There are three M2 hexagon socket set screws attached to the diffuser plates. Attach to the lighting's internal ring section by tightening the screws using the included hexagonal wrench.

Insert the MDF-DR** into the MAD-DR** adapter and then insert into the lighting. Use the screws and hexagonal wrench included with the adapter to secure.